Endurance E5000 Elliptical Owner's Manual download pdf (Page 14)

JOHNSON FITNESS TREADMILL T8000/T8000 PRO

JOHNSON ELLIPTICAL E8000 JOHNSON ELLIPTICAL E8000

N/A

0 65,000 hrs N/Ahour

30 sec

30 sec 180 sec 1second

ACCUMU-

LATED

TIME

PAUSE

TIME

CUSTOM

SETTING

DEFAULT MINIMUM MAXIMUM UNIT STEP DESCRIPTION

Accumulated time is not editable, but

only for display. Holding the Left and

Right Arrow keys simultaneously to reset

the accumulated time. After the machine

reaches the maximum time, it will reset

to "0" automatically.

This is the maximum time during which a

workout can remain in pause mode.

Restrictions exist for the machine not

equipped with a battery.

P10

P11

P12

P13

P14

P15

EL N/A N/A N/A

MODEL

SOFTWARE

VERSION

ERROR

LOG

METS

LANGUAGE

CB - Upright Bike

RB - Recumbent Bike

EL – Elliptical Trainer

ST - Stepper

Software version is not editable, but only

for display.

If this option is "ON", the METs prompt

becomes an individual display in PROMPT

AREA. If "OFF", there will be an alternate

prompt in RPM and METs at the lower-

right corner of the WORKOUT PROFILE

WINDOW.

The function would clear all custom

settings had stored on the unit and all

settings return to manufacturer default

value. Holding the Left and Right Arrow

keys simultaneously to clear all custom

settings values.

N/A

English

N/A N/A N/A N/A

N/A

N/A N/A

N/A

UNITS

The measurement unit prompts for weight,

distance, and speed.

Metric Metric English N/A N/A

N/A N/A N/A N/A N/A

OFF ON OFF N/A N/A

RESET

ALL

N/A N/A N/A N/A N/A

The native language prompts in the

INSTRUCTION CENTER.

Error log is not editable, but only for display.

Holding the Left and Right Arrow keys

simultaneously to erase the error log.

MAINTENANCE

Johnson Elliptical Trainer E8000 is built for commercial environment 12 hours a day and seven

days a week. However, as a club manager or owner, you are responsible for cleaning and

maintaining the unit’s integrity. If you fail to maintain the elliptical trainer as described below,

it could affect or void the Johnson limited warranty.

NOTE: Safety of the equipment can be maintained only if the equipment is examined regularly

for damage or wear. Keep the equipment out of use until defective parts are repaired or

replaced. Pay special attention to parts that are subject to wear, such as display console,

console mounting screws, handrails, link arms, pedal arms and pedals.

DAILY INSPECTION

Look and listen for loose fasteners, unusual noises, and any other indications that the

equipment may be in need of service. If you notice any of these, obtain service.

DAILY MAINTENANCE

Johnson Fitness recommends the E8000 be cleaned before and after each workout. The

following daily maintenance tips will keep your unit operating at peak performance:

1) Use a damp, soft cloth with water or mild liquid detergent to clean all exposed surfaces.

DO NOT use ammonia, chlorine, or acid-based cleaners.

2) Keep the display console free of fingerprints and salt build-up caused by sweat.

3) Frequently vacuum the floor underneath the unit to prevent the accumulation of dust and

dirt, which can affect the smooth operation of the unit.

MONTHLY MAINTENANCE

Perform the following services each month, or as needed:

1) Check that the console, handrails, link arms, pedal arms and pedals.

RECYCLING THE BATTERY

When the Johnson elliptical trainer is about to be discarded at the end of its useful life, the

rechargeable battery must first be removed and recycled. If the elliptical trainer is being

equipped with the battery. To access the battery, unscrew the cover on the back of the

console. To remove the battery, disconnect the cable.

1 2 ... 9 10 11 12 13 14 15

Comments to this Manuals

No comments

Endurance E5000 Elliptical Owner's Manual Page 14

Comments to this Manuals

Related products and manuals for Fitness, gymnastics & weight training Endurance E5000 Elliptical